Zhone 3920Plus Bedienerhandbuch PDF herunterladen (Seite 248)

COMSPHERE 392xPlus Modems

14-16 October 1998 3920-A2-GH30-40

S-Register List

S-Registers affect the operating parameters of the 392xPlus modems. S-Registers are only

applicable when the DTE Dialer Type configuration option is set for AT. (Refer to the &Mn and

&Qn commands.)

Table 14-3 lists all S-Registers supported by the 392xPlus modems. The first column lists the

S-Register. The second column lists all possible values for that register. The third column lists the

key sequence used to enter the equivalent from the DCP. Use this column to refer to chapters about

the DCP menu branches if further description is necessary..

NOTE

In some countries, the range of allowable values of some

S-Registers are restricted. If the DTE attempts to enter an illegal

value, the modem will answer OK, but it will set the register to the

closest legal value. The DTE can check the actual value of the

S-Register Format

S-Registers can be displayed and/or modified when the modem is in Command mode. To display

the value of an S-Register, issue the following command:

TYPE: AT S n?

Where: n is the register number.

PRESS: Enter

To modify the value of an S-Register, issue the following command:

TYPE: AT S n=r

Where: n is the register number, and r is the new value.

PRESS: Enter

In Table 14-3, the value for n is listed in the S-Register column, and the value for r is listed in the

Description column.

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 353 354

Keine Kommentare

Zhone 3920Plus Bedienerhandbuch Seite 248