Zhone 3920Plus Bedienerhandbuch PDF herunterladen (Seite 177)

Control Branch

7-173920-A2-GH30-40 October 1998

VF Thresholds Update

The VF Thresholds Update function allows you to set the thresholds that determine the Health

and Status alarm conditions for the VF parameters. Refer to Table 7-1 in this section for VF

thresholds and their valid ranges and default values.

To access VF_Thresh_Update from the Control branch, make the following selections:

Control: <

VF_Thresh_Update

Press the key until VF_Thresh_Update appears. Press any function key to select

VF_Thresh_Update.

VF Thresholds

Edit Save Reset

Select Edit.

In the following example, the RSL High threshold is changed from 09 (–dBm) to 10. This

example demonstrates VF threshold editing and saving. With the exception of Signal Quality, all

VF thresholds may be modified in this manner. Signal Quality uses a menu selection with

possible values of Excelent (Excellent), Good, Fair, Poor, or No Signal. Editing and saving a VF

threshold is similar to editing and saving a configuration option. (For another example of editing

and saving, refer to the Editing and Saving a Configuration Option section in Chapter 5,

Configure Branch.)

RSL High (-dBm)

Nxt " 0

In the example shown above, 09 is the upper (High) RSL threshold (in –dBm). To change the

09 to 10, make the following selections:

RSL High (-dBm)

Nxt " 1

Select the F2 ( " ) key to increment the number above the cursor ( 0 ) to 1.

1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 353 354

Keine Kommentare

Zhone 3920Plus Bedienerhandbuch Seite 177