Zhone 3920Plus Bedienerhandbuch PDF herunterladen (Seite 199)

Call Setup Branch

10-73920-A2-GH30-40 October 1998

If the modem is operating in a Dial Backup mode, the Dial Standby function forces the modem

to primary leased-lines and the LCD displays the status message Command Complete.

Once the modem is in Dial Standby mode, Return_to_Dial appears on the LCD. Selecting this

function forces the modem to backup networks and the LCD displays the status message

Command Complete.

To exit this function and remain in the Call Setup branch, press the

key. To exit and return

to the Top-Level menu, press the

key.

Change Directory

Change Directory allows you to enter or modify telephone numbers. The modem has nonvolatile

memory locations that allow you to store up to 24 telephone numbers. Each directory location

can accept up to 40 characters; this includes the telephone number and dial command modifiers.

Any telephone number dialed using the DCP Dial command must appear in a directory location.

NOTE

If the modem is operating on leased lines and has a dial line

attached for dial backup purposes, it is required that directory

location 1 contain the telephone number used for dial backup.

To access Change Directory from the Call Setup branch, make the following selections:

Call Setup: <

Change_Directory

Press the key until Change_Directory appears. Press any function key to select

Change_Directory.

01:551234z

Nxt " #

The phone number listed in directory location 1 appears. Select Nxt to display other directory

locations.

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 353 354

Keine Kommentare

Zhone 3920Plus Bedienerhandbuch Seite 199