Zhone IMA CS-200 System Spezifikationen

IMACSIntegrated Multiple Access Communications ServerSystem Reference GuidePublication 999-001966Release 3.7Revision A0June 1998Premisys Communication

Model No.Running HeadIf this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontin

3-42 Reference GuideModel No.Running HeadCross-Connecting WAN Time Slots System Configuration and OperationTESTThe second Test column lets you select

Reference Guide 3-43System Configuration and Operation Cross-Connecting WAN Time SlotsFigure 3-28. Cross-Connect Circuit Type SelectionTCYou can defin

3-44 Reference GuideModel No.Running HeadCross-Connecting WAN Time Slots System Configuration and OperationFor v (voice), no TC choice is available,

Reference Guide 3-45System Configuration and Operation Cross-Connecting WAN Time SlotsFigure 3-30. Signaling Bit Pattern SelectionFigure 3-31. Voice O

3-46 Reference GuideModel No.Running HeadCross-Connecting WAN Time Slots System Configuration and OperationCNVThe Conversion (CNV) parameter allows y

Reference Guide 3-47System Configuration and Operation Cross-Connecting WAN Time SlotsFigure 3-32. Selecting PCM ConversionNode_1 | C1 CPU-3 X

3-48 Reference GuideModel No.Running HeadCross-Connecting WAN Time Slots System Configuration and OperationFigure 3-33. Selecting Signaling Conversio

Reference Guide 3-49System Configuration and Operation Cross-Connect Actions3.13 Cross-Connect ActionsTable 3-6 summarizes the actions you can perform

3-50 Reference GuideModel No.Running HeadCross-Connect Actions System Configuration and OperationFigure 3-35. Delete Cross-Connection ScreenFigure 3-

Reference Guide 3-51System Configuration and Operation Testing Voice Cross-ConnectsFigure 3-36 shows the WAN card in TS (time slot) 8 through 12 being

Name and Type of EquipmentIMACS/600, IMACS/800, IMACS/900 Integrated Multiple Access Communication ServerUnder 89/336/EEC as amended by 92/31/EEC, and

3-52 Reference GuideModel No.Running HeadTesting Voice Cross-Connects System Configuration and OperationFigure 3-38. Highlighted Circuit on a WAN Cro

Reference Guide 3-53System Configuration and Operation Testing Voice Cross-ConnectsTable 3-7. WAN Cross-Connect Test Screen OptionsTx ABCD BITSThe Tr

3-54 Reference GuideModel No.Running HeadTesting Voice Cross-Connects System Configuration and OperationPATTERNThe Pattern parameter allows you to ch

Reference Guide 3-55System Configuration and Operation Using the Broadcast Option3.15 Using the Broadcast OptionOne of the special features of WAN tim

3-56 Reference GuideModel No.Running HeadUsing the Broadcast Option System Configuration and OperationBroadcast circuits can be initiated, updated, o

Reference Guide 3-57System Configuration and Operation Using the Broadcast OptionFigure 3-43. Typical Add Broadcast ScreenIn this example, the broadca

3-58 Reference GuideModel No.Running HeadUsing the Broadcast Option System Configuration and OperationFigure 3-44. Typical "To" Destination

Reference Guide 3-59System Configuration and Operation Using the Broadcast OptionFigure 3-46. Typical Complete Broadcast CircuitFigure 3-47. Three Bro

3-60 Reference GuideModel No.Running HeadUsing the Broadcast Option System Configuration and OperationFigure 3-48. Typical Deleted Broadcast Circuit3

Reference Guide 3-61System Configuration and Operation Using the Broadcast OptionTable 3-8. Broadcast Screen Actions3.15.3 Test Access Digroups (TADS

Model No.Running Headassociated with a single line individual service may be extended by means of a certified connector assembly (telephone extension

3-62 Reference GuideModel No.Running HeadUsing the Broadcast Option System Configuration and OperationFigure 3-49. The TADS screenIn Figure 3-49, the

Reference Guide 3-63System Configuration and Operation Using the Broadcast OptionFigure 3-50. The Add Monitor Circuit ScreenCros connect information i

3-64 Reference GuideModel No.Running HeadUsing the Broadcast Option System Configuration and OperationFigure 3-51. Completed Monitor CircuitFigure 3-

Reference Guide 3-65System Configuration and Operation Using the Broadcast OptionFigure 3-52. Monitor Circuit Diagram3.15.5 Split CircuitPressing the

3-66 Reference GuideModel No.Running HeadUsing the Broadcast Option System Configuration and OperationFigure 3-53. TADS Screen with Split CircuitsFig

Reference Guide 3-67System Configuration and Operation Using the Broadcast Option3.15.6 ReleasePressing the “R” command allows you to release the circ

3-68 Reference GuideModel No.Running HeadUsing the Broadcast Option System Configuration and OperationFigure 3-56. TLA Circuit State ScreenTable 3-9.

Reference Guide 3-69System Configuration and Operation Signaling and Companding (BCON)3.16 Signaling and Companding (BCON)User card ports may or may n

3-70 Reference GuideModel No.Running HeadSignaling and Companding (BCON) System Configuration and OperationTo change the signaling and/or companding

Reference Guide 3-71System Configuration and Operation Checking the Time Slot MapFigure 3-58 shows the WAN card cross-connect screen for a bus-connect

EuropeEuropean Telecommunication ApprovalsUnder the Telecommunications Terminal Directive the following connections are approved:The WAN DUAL card, th

3-72 Reference GuideModel No.Running HeadChecking the Time Slot Map System Configuration and OperationFigure 3-59. Typical Time Slot Screen for T1 Tr

Reference Guide 3-73System Configuration and OperationRecording the Time Slot ConfigurationFigure 3-60. Typical Time Slot Screen in E1 Operation3.18 R

3-74 Reference GuideModel No.Running HeadRecording the Time Slot ConfigurationSystem Configuration and OperationTable 3-11. Time Slot Recording Form

Reference Guide 3-75System Configuration and OperationRecording the Time Slot ConfigurationTable 3-12. Time Slot Recording Form for E1 OperationWAN P

3-76 Reference GuideModel No.Running HeadRedundant Operations System Configuration and Operation3.19 Redundant OperationsThis section describes the r

Reference Guide 3-77System Configuration and Operation CPU Card RedundancyFigure 3-61. Typical Redundant-Power Supply System Main Screen3.21 CPU Card

3-78 Reference GuideModel No.Running HeadCPU Card Redundancy System Configuration and OperationFigure 3-61 shows a System Main Screen with redundant

Reference Guide 3-79System Configuration and Operation WAN Card RedundancyFigure 3-63. Typical System with CPU Switchover Completed3.22 WAN Card Redun

3-80 Reference GuideModel No.Running HeadWAN Card Redundancy System Configuration and OperationSimilary, a WAN card in slot W4 automatically becomes

Reference Guide 3-81System Configuration and Operation WAN Card RedundancyFigure 3-65. Typical WAN Port Redundancy Switch in CPU RCON System3.22.2 Cro

Model No.Running HeadThe Interface Card is also listed in the approval documentation and provides a direct metallic path between the CEPT module and a

3-82 Reference GuideModel No.Running HeadWAN Card Redundancy System Configuration and OperationIn cross-connect systems, switching always occur on bo

Reference Guide 3-83System Configuration and Operation WAN Card RedundancyFigure 3-67. Switching to a Redundant Cross-Connect WAN Card Node_1 |

3-84 Reference GuideModel No.Running HeadADPCM Card Redundancy System Configuration and OperationFigure 3-68. Typical Cross-Connect WAN Card Redundan

Reference Guide 3-85System Configuration and Operation ADPCM Card RedundancyFigure 3-69. Typical System with Redundant ADPCM CardsFigure 3-70. Typical

3-86 Reference GuideModel No.Running HeadADPCM Card Redundancy System Configuration and OperationTo choose a redundant ADPCM card for the system, pro

Reference Guide 4-1CPU Card IntroductionChapter 4CPU Card4.1 Introduction4.2 CPU-3 XCON (880120 / 880121 / 880022 / 880160)The CPU-3 XCON card control

4-2 Reference GuideModel No.Running HeadCPU Card User Screens and Settings CPU Card4.2.1.2 Installing the CardInstall the CPU-3 card into slot C1 of

Reference Guide 4-3CPU Card CPU Card User Screens and SettingsThe CPU card has numerous settings that you must configure. The System Main Screen displ

4-4 Reference GuideModel No.Running HeadCPU Card User Screens and Settings CPU CardSUPERUSERThe "Superuser" password level is reserved for

Reference Guide 4-5CPU Card CPU Card User Screens and SettingsALRM SEQThe Alarm Sequence setting establishes how the sequence number for alarms is gen

PERSÖNLICHE SICHERHEIT BEI INSTALLATION ODER BEI WARTUNG SICHERZUSTELLEN UND UM SCHADEN AN DER EINRICHTUNG ODER AN DER ZUM ANSCHLUß BESTIMMTEN EINRICH

4-6 Reference GuideModel No.Running HeadCPU Card User Screens and Settings CPU CardFigure 4-2. Typical CPU Print Alarm ScreenTable 4-2 lists the oper

Reference Guide 4-7CPU Card CPU Card User Screens and SettingsTable 4-3. Print Alarm Screen Options and DefaultsNotes:1. The Print Alarms option must

4-8 Reference GuideModel No.Running HeadCPU Card User Screens and Settings CPU CardPRT PHONE#The Print Phone Number field shows the number the modem

Reference Guide 4-9CPU Card TCP/IP Network Management3. Forty (40) seconds after the last alarm message is reported.When the specified interval cycle

4-10 Reference GuideModel No.Running HeadTCP/IP Network Management CPU CardIf you do not understand the NMS concepts of IP addressing, SNMP, SLIP or

Reference Guide 4-11CPU Card TCP/IP Network ManagementFigure 4-5. Typical TCP/IP ScreenTable 4-4. TCP/IP Screen ActionsAction FunctionPing Test to see

4-12 Reference GuideModel No.Running HeadTCP/IP Network Management CPU CardTable 4-5. TCP/IP Screen Parameters and OptionsNotes:1. The user options d

Reference Guide 4-13CPU Card TCP/IP Network ManagementDEFAULT IP PORTThe Default IP Port setting tells the CPU card where IP packets will be sent or r

4-14 Reference GuideModel No.Running HeadTCP/IP Network Management CPU CardRPT2 COMMUN STRThe RPT2 Community String holds the community string for th

Reference Guide 4-15CPU Card TCP/IP Network ManagementFigure 4-6. Typical Network Statistics Screen, Page 1To move from one screen (page) to another,

Model No.Running Head

4-16 Reference GuideModel No.Running HeadTCP/IP Network Management CPU Card4.4.1.1 SLIP ParametersThe Serial Line Interface Protocol (SLIP) parameter

Reference Guide 4-17CPU Card TCP/IP Network ManagementBytes Sent OutThe Bytes Sent Out field shows the number of bytes transmitted to the network host

4-18 Reference GuideModel No.Running HeadTCP/IP Network Management CPU Card4.4.1.3 IP ParametersThe IP parameters appear in the second Network Statis

Reference Guide 4-19CPU Card TCP/IP Network ManagementDatagrams Delivered AboveThe Datagrams Delivered Above field shows the number of datagrams sent

4-20 Reference GuideModel No.Running HeadTCP/IP Network Management CPU CardEcho Requests ReceivedThe Echo Requests Received field shows the number of

Reference Guide 4-21CPU Card TCP/IP Network ManagementFigure 4-8. Typical Network Statistics Screen, Page 3Packets ReceivedThe Packets Received field

4-22 Reference GuideModel No.Running HeadTCP/IP Network Management CPU CardPackets Discarded - WindowThe Packets Discarded - Window field shows the n

Reference Guide 4-23CPU Card TCP/IP Network ManagementRTT IncreasedThe RTT Increased field shows the number of times the retransmission time-out was i

4-24 Reference GuideModel No.Running HeadTCP/IP Network Management CPU CardFigure 4-9. Typical Network Statistics Screen, Page 4Packets From AboveThe

Reference Guide 4-25CPU Card TCP/IP Network ManagementBytes ReceivedThe Bytes Received field shows the total number of bytes that were received by the

Reference Guide iContentsContentsChapter 1 System Overview1.1 Introduction ...

4-26 Reference GuideModel No.Running HeadIP Packet Routing CPU CardTX Wait for BufferThe TX Wait for Buffer field shows the total number of transmiss

Reference Guide 4-27CPU Card IP Packet Routing•If a match is not found for the packet, it is routed to the interface specified in the DEF DEST field.

4-28 Reference GuideModel No.Running HeadIP Packet Routing CPU CardThe Routing screen column headings are associated with the incoming WAN link assoc

Reference Guide 4-29CPU Card IP Packet RoutingTable 4-8. Settings for Routing ParametersIP NETThe IP Net field shows the IP address of a device locate

4-30 Reference GuideModel No.Running HeadIP Packet Routing CPU CardAdding RoutesIn the Routing Screen, type a (Add) to present a data entry screen.

Reference Guide 4-31CPU Card IP Packet RoutingFigure 4-12. Routing Address Entry Screen Node_1 | C1 CPU XCON 8802 Rev C3-0 Ser 00672 |

4-32 Reference GuideModel No.Running HeadIP Packet Routing CPU CardFigure 4-13. Slot/Unit Options ScreenTable 4-10. Slot/Unit Options Slot/Unit Opti

Reference Guide 4-33CPU Card CPU-3 BCON (880020 / 880021 / 880022 / 880060)4.6 CPU-3 BCON (880020 / 880021 / 880022 / 880060)The CPU-3 BCON is the bas

4-34 Reference GuideModel No.Running HeadCPU Card Error Messages CPU Card4.8 CPU Card Error MessagesRefer to Appendix B in the System Reference Guide

Reference Guide 5-1Interface Card IntroductionChapter 5Interface Card5.1 IntroductionThis chapter provides specific installation, configuration, and t

ii Reference GuideModel No.Running HeadContents2.5.3 Front-Loading Chassis with Power Supplies on Top ... 2-162.5.4 Power

5-2 Reference GuideModel No.Running HeadInterface Card Descriptions Interface CardFigure 5-1. INF+M T1E1*8 Card JacksTable 5-1. INF+M T1E1*8 Card Por

Reference Guide 5-3Interface Card Interface Card Descriptions5.2.3 Using the Modem PortThe internal modem of the INF+M T1E1*8 card is an asynchronous,

5-4 Reference GuideModel No.Running HeadInterface Card Descriptions Interface Card5.2.4 Logging On RemotelyNormall a local network operator uses a VT

Reference Guide 5-5Interface Card Interface Card DescriptionsFigure 5-3. INF T1E1*8 Interface Card PortsTable 5-3. INF T1E1*8 Card Ports and Functions

5-6 Reference GuideModel No.Running HeadInterface Card Descriptions Interface Card5.2.7 INF T1*2 Card Description (892520 / 892560)The INF T1*2 inter

Reference Guide 5-7Interface Card Interface Card DescriptionsFigure 5-5. INF+M T1*2 Interface Card Port5.2.9 INF E1*2 Card Description (892760)The INF

5-8 Reference GuideModel No.Running HeadInterface Card Ports and Functionality Interface CardFigure 5-6. INF E1*2 Interface Card Port5.3 Interface Ca

Reference Guide 5-9Interface Card Using the Node PortFigure 5-7. Component Layout for the INF+M T1E1*8 and INF T1E1*8 Interface Card5.4 Using the Node

5-10 Reference GuideModel No.Running HeadInterface Card User Screens and Settings Interface CardFigure 5-8. Node Port ACO Alarm InterfaceTable 5-5.

Reference Guide 5-11Interface Card Interface Card User Screens and SettingsFigure 5-9. Typical Interface Card Main ScreenThe bottom line of this scree

Reference Guide iiiContents3.10.3 Cross-Connect Model...3-313.11 Automatic

5-12 Reference GuideModel No.Running HeadInterface Card User Screens and Settings Interface Card5.5.1.1 Setting the System Date and TimeTo set the cu

Reference Guide 5-13Interface Card Interface Card User Screens and SettingsA network clock is the best Primary Clock source. To select this source, se

5-14 Reference GuideModel No.Running HeadInterface Card User Screens and Settings Interface CardYou can set up signaling conversion for all types of

Reference Guide 5-15Interface Card Interface Card User Screens and SettingsTable 5-8. Signaling Conversion Table Screen Actions5.5.3 Remote Terminal

5-16 Reference GuideModel No.Running HeadInterface Card User Screens and Settings Interface Card5.5.3.2 Network PrioritiesAll integrated access contr

Reference Guide 5-17Interface Card Interface Card User Screens and SettingsTable 5-9. “AT” Commands Used by RTS5.5.4 Ports ScreenYou also must config

5-18 Reference GuideModel No.Running HeadInterface Card User Screens and Settings Interface CardFigure 5-12. Typical Ports Screen (INTF+M)This screen

Reference Guide 5-19Interface Card Interface Card User Screens and SettingsFor the modem port, choose ui, ui-pr, or none.RATEThe transmission rate for

5-20 Reference GuideModel No.Running HeadInterface Card Error Messages Interface Card5.6 Interface Card Error MessagesRefer to Appendix B in the Syst

Reference Guide 5-21Interface Card Interface Card TroubleshootingNote that removal of the Interface card will cause a service disruption on all T1 and

Model No.Running HeadTrademarks:Premisys is a registered trademark of Premisys Communications, Inc.5ESS is a registered trademark of Lucent Technolog

iv Reference GuideModel No.Running HeadContents4.6 CPU-3 BCON (880020 / 880021 / 880022 / 880060) ... 4-334.7 CPU-3 RCO

5-22 Reference GuideModel No.Running HeadInterface Card Troubleshooting Interface Card

Reference Guide 6-1WAN Card IntroductionChapter 6WAN Card6.1 IntroductionThis chapter provides installation, configuration, and troubleshooting inform

6-2 Reference GuideModel No.Running HeadWAN Card Descriptions WAN Card6.2.1.2 Card External Connectors and Signal PinoutsThe WAN SINGLE card does not

Reference Guide 6-3WAN Card WAN Card Descriptions6.2.4.1 Card Jumper/Switch SettingsThe WAN-R card does not have any jumpers or switches on its mother

6-4 Reference GuideModel No.Running HeadWAN Card Descriptions WAN Card6.2.6.2 Module InstallationFor DSX or CEPT operation, you must install one of t

Reference Guide 6-5WAN Card WAN Card DescriptionsFigure 6-2. DSX/CEPT Module Jumpers (E1 75 Ohm)Figure 6-3. DSX/CEPT Module Jumpers (E1 120 Ohm)Jumper

6-6 Reference GuideModel No.Running HeadWAN Card Descriptions WAN CardFigure 6-4. DSX/CEPT Module Jumpers (T1)Figure 6-5. DSX/CEPT Module Jumpers (T1

Reference Guide 6-7WAN Card WAN Card DescriptionsFigure 6-6. DSX/CEPT Module Jumpers (E1 75 Ohm)Figure 6-7. DSX/CEPT Module Jumpers (E1 120 Ohms)6.2.6

6-8 Reference GuideModel No.Running HeadWAN Card Descriptions WAN CardFigure 6-8. DSX/CEPT Revision E+ Module JumpersFigure 6-9. Module End ViewFigur

Reference Guide 6-9WAN Card WAN Card Descriptions6.2.6.5 Revision A1 Through D1 ModulesThe DSX/CEPT Revision A1 through D1 modules (Figure 6-13 and Fi

Reference Guide vContents6.2.1.2 Card External Connectors and Signal Pinouts ...6-26.2.2 WAN DUAL Card Description

6-10 Reference GuideModel No.Running HeadWAN Card Descriptions WAN CardFigure 6-17. 120-Ohm E1 Jumper SettingsWhen installing the 811 CSU/DSX module

Reference Guide 6-11WAN Card WAN Card DescriptionsWhen assembling and installing the module on the WAN card, it is our advice that the plastic standof

6-12 Reference GuideModel No.Running HeadWAN Card Descriptions WAN CardFor 75-ohm unbalanced E1, set the adapter panel jumpers to UNBAL in one locati

Reference Guide 6-13WAN Card WAN Card User Screens and Settings6.2.9 Installing the WAN CardsAfter installing the proper modules on the WAN cards, ins

6-14 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardThe headers of all WAN card screens show the types of modules ins

Reference Guide 6-15WAN Card WAN Card User Screens and SettingsTable 6-3. T1 CSU and DSX Option Settings and DefaultsNotes:1. Valid options for Bus C

6-16 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardSTATEIn the standby state, the WAN port is electrically disconnec

Reference Guide 6-17WAN Card WAN Card User Screens and Settingsmust provide 1s density). If the Line Code parameter for the CSU is b8zs, the Pulse opt

6-18 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardAIS/ALMThe AIS/ALM (Alarm Indication Signal/Alarm) setting allows

Reference Guide 6-19WAN Card WAN Card User Screens and SettingsFigure 6-21. Line and Local LoopbacksLOCAL LBThe Local Loopback setting allows you to l

vi Reference GuideModel No.Running HeadContentsAppendix A System SpecificationsA.1 FCC Requirements ...

6-20 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardFigure 6-22. DS0 Time Slot LoopbackLB ADDRThe Loopback Address se

Reference Guide 6-21WAN Card WAN Card User Screens and SettingsLB DETThis option allows the card to detect DS1 channel, and ANSI T1.403 (8015 WAN only

6-22 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardGROUPThe Group setting identifies a method of link-fail alarm pro

Reference Guide 6-23WAN Card WAN Card User Screens and Settings4. SYS 1(C) sends an alarm message to SYS 2 (C1), telling it that W1-1(A) is either in

6-24 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardTable 6-6. CEPT/HDSL Screen ActionsTable 6-7. CEPT/HDSL Screen

Reference Guide 6-25WAN Card WAN Card User Screens and Settings5. Selection of GROUP is a two-step process. After identifying the group number (1-4),

6-26 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardLOCAL LBThe Loopback setting controls looping of the full E1 line

Reference Guide 6-27WAN Card WAN Card User Screens and SettingsEER THRHDThe Excessive Error Rate Threshold selects the error rate, which an alarm is d

6-28 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardFigure 6-25. E1 Cross-Connect Screen (display only)Figure 6-26. T

Reference Guide 6-29WAN Card WAN Card User Screens and Settings6.3.4 Performance DataAll WAN cards gather performance data. The performance data for a

Reference Guide viiFiguresFigures1-1 Front-Loading Chassis with Power Supplies on the Side...1-21-2

6-30 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardTable 6-8 lists the actions available from the Performance Data S

Reference Guide 6-31WAN Card WAN Card User Screens and SettingsLOFCThe Loss of Frame Count (LOFC) is the number of times a Loss Of Frame (LOF) is decl

6-32 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardFigure 6-28. Typical Far-End Performance Data ScreenPress “c” (Cl

Reference Guide 6-33WAN Card WAN Card User Screens and SettingsESAn Errored Second (ES) is a second with one or more CRC-6 (ESF) or BPV (D4/D-Frame) e

6-34 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardFigure 6-29. Typical WAN Card Test ScreenTable 6-10. Test Screen

Reference Guide 6-35WAN Card WAN Card User Screens and SettingsNotes:1. The lp-up (loop-up) and lp-dn (loop down) codes are not supported for CEPT or

6-36 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardCSESThe Consecutive Severely Errored Seconds (CSES) field is trig

Reference Guide 6-37WAN Card WAN Card User Screens and SettingsFigure 6-30. Typical HDSL ScreenTable 6-12. HDSL Screen Actions Table 6-13. HDSL Scree

6-38 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardTRAIN MODEThis parameter determines the master/slave relationship

Reference Guide 6-39WAN Card WAN Card User Screens and SettingsFigure 6-31. Typical HDSL Performance Data Screen (local 15-minute interval)Figure 6-3

viii Reference GuideModel No.Running HeadFigures3-22 Typical WAN Time Slot Assignment Screen ...

6-40 Reference GuideModel No.Running HeadWAN Card User Screens and Settings WAN CardFigure 6-32. Typical HDSL Performance Data Screen(remote 24-hour

Reference Guide 6-41WAN Card PARS ScreenTable 6-14. HDSL Performance Data Screen ActionsESAn Errored Second (ES) is a second with one or more CRC-6 (

6-42 Reference GuideModel No.Running HeadPARS Screen WAN CardFigure 6-33. Typical T1 WAN PARS ScreenTable 6-15. T1 WAN PARS Screen ActionsTable 6-16

Reference Guide 6-43WAN Card PARS ScreenFigure 6-34. Typical E1 WAN PARS ScreenFigure 6-34 shows an E1 WAN PARS screen. For E1 WANs, signaling is alwa

6-44 Reference GuideModel No.Running HeadPARS Screen WAN CardFigure 6-35. WAN Cross-Connect ScreenFigure 6-35 shows the WAN Cross-connect screen afte

Reference Guide 6-45WAN Card PARS ScreenFigure 6-36. System (Main) Cross-Connect Screen in PARS MODEFigure 6-36 shows the System (Main) cross-connect

6-46 Reference GuideModel No.Running HeadPARS Screen WAN Card4. Once a primary WAN is assigned to PARS mode, the secondary WAN will be assigned to AP

Reference Guide 6-47WAN Card PARS ScreenFigure 6-37. Ring Network Traffic FlowIAD 1 IAD 2IAD 3IAD 4IAD 5

6-48 Reference GuideModel No.Running HeadPARS Screen WAN Card6.4.3 One Link is LostIf the link from IAD 1 to IAD 2 fails, then the traffic is reroute

Reference Guide 6-49WAN Card PARS Screen6.4.4 Two Links are Lost, One IAD is Isolated from the RingIf the link from IAD 1 to IAD 2, and the link from

Reference Guide ixFigures3-70 Typical ADPCM Card Main Screen...3-853-7

6-50 Reference GuideModel No.Running HeadPARS Screen WAN Card6.4.5 Two Links are Lost, Two IADs are Separated from the RingIf the link from IAD 1 to

Reference Guide 6-51WAN Card PARS Screen6.4.7 Normal Operation - No Link FailureAny of the WAN lines in a cross-connect integrated access device can b

6-52 Reference GuideModel No.Running HeadPARS Screen WAN CardFigure 6-42. User card Termination on PARS WANFigure 6-43. PARS Normal Operation Mode us

Reference Guide 6-53WAN Card PARS ScreenA four node configuration operating in PARS mode is illustrated in Figure 6-43. In this configuration one user

6-54 Reference GuideModel No.Running HeadPARS Screen WAN CardFigure 6-45. PARS Rerouting (two nodes)Figure 6-45 shows detail of PARS mode for two nod

Reference Guide 6-55WAN Card WAN Card Error Messages6.5 WAN Card Error MessagesRefer to Appendix B in the System Reference Guide for further informati

6-56 Reference GuideModel No.Running HeadWAN Card Troubleshooting WAN Card

Reference Guide A-1Appendix ASystem SpecificationsA.1 FCC RequirementsTable A-1. FCC Registration Information - Part 1 Table A-2. FCC Registration Inf

A-2 Reference GuideModel No.Running Head Table A-3. FCC Registration Information - Part 3A.2 UK RequirementsTable A-4. Minimum Creepage and Clearance

Reference Guide A-3Table A-5. System Electrical and Environmental RequirementsTable A-6 lists the cards that require pre-installation setup. The cards

x Reference GuideModel No.Running HeadFigures6-22 DS0 Time Slot Loopback...

A-4 Reference GuideModel No.Running HeadTable A-7. Card Current MeasurementsCard Name and Description1 (mA) @ +5VStndby Active1 (mA) @ +5VStndby Acti

Reference Guide A-5A.4 Power RequirementsTable A-8. Power Supply Options CompatibilityNote:The 100V and 105V Ringing Generators cannot be mixed in a s

A-6 Reference GuideModel No.Running HeadTable A-9. Replacement Fuses for the External Talk Battery SupplyTable A-10. AC Power Supply SpecificationsTa

Reference Guide A-7Table A-13. +24 VDC Power Supply SpecificationsTable A-14. Ringing Generator SpecificationsParameter RatingInput Power +24VOutpu

A-8 Reference GuideModel No.Running HeadA.5 Alarm Filter RequirementsTable A-15. Alarm and Filter DescriptionsFilter Alarm MeaningOOS Ou

Reference Guide A-9A.6 Physical Specifications and Power ConsumptionTable A-16. Physical Specifications and Power ConsumptionItem Height Width Depth

A-10 Reference GuideModel No.Running HeadFXO Card 8138 8.0 20.3 .94 2.4 7.5 19.0 1.25 .57 7 23.9FXO Card 8139 8.0 20.3 .94 2.4 7.5 19.0 1.25 .57 7

Reference Guide A-11A.7 Part Number / Acronym TableThe following table details the part number of each card or peripheral listed in this guide.Product

A-12 Reference GuideModel No.Running Head

Reference Guide B-1Appendix BError MessagesB.1 IntroductionThis chapter lists the integrated access system error messages. One of these messages may a

Reference Guide xiTablesTables1-1 Card Slots for Front-Loading Chassis with Power Supplies on the Side ...1-21-2 Card Slots f

B-2 Reference GuideModel No.Running HeadAll available PVCs are already taken.The number of PVCs available on the FRAD Card Main Screen has been exceed

Reference Guide B-3Cannot define any more PVC connections.The maximum number of PVC connections has been reached.Cannot define any more XCON circuits.

B-4 Reference GuideModel No.Running HeadCannot use the same TS on different WAN.You cannot assign an SRU card port to the same time slot on different

Reference Guide B-5Combined ADPCM rate must equal 64K.You cannot assign a 40 kbps and a 32 kbps channel to the same ADPCM 64 kbps engine. The only val

B-6 Reference GuideModel No.Running HeadEach WAN can have only one d-chan.You cannot assign two D-channels to the same WAN port.Empty field is not all

Reference Guide B-7Group already taken.This group is already assigned.Illegal IP Mask.The IP netmask number you chose is invalid.Invalid character in

B-8 Reference GuideModel No.Running HeadInvalid password for this command.You cannot use the debug command from the System Test and Debug Screen witho

Reference Guide B-9Local LB & Test Pattern can’t be ON together.You cannot perform a loopback with a test pattern applied, and you cannot apply a

B-10 Reference GuideModel No.Running HeadN392 must be less than or equal to N393.N392 determines the amount of errors that will be tolerated during th

Reference Guide B-11No more than two WANs in BERT test are allowed.You can place only two WAN ports in the BERT test mode simultaneously.No second net

xii Reference GuideModel No.Running HeadTables6-7 CEPT/HDSL Screen Option Settings and Defaults...

B-12 Reference GuideModel No.Running HeadOnly broadcast.data type can be controlled.You cannot update or delete a regular cross-connect circuit from t

Reference Guide B-13Performance statistics is not available in slc96.You cannot obtain performance statistics for a WAN port in the slc96 mode.Perform

B-14 Reference GuideModel No.Running HeadProfile has to be loaded first.You cannot use the Dial command in the HSU Card Main Screen without first load

Reference Guide B-15Restricted field.You cannot access the Superuser password field on the CPU Card Main Screen. This password is factory-assigned.Sel

B-16 Reference GuideModel No.Running HeadSR TS overlapping.The subrate circuit assigned does not allow enough space for a previously assigned circuit

Reference Guide B-17TS 16 cannot be used with v&s.You cannot assign a voice circuit with signaling to time slot 16 of an E1 WAN port.TS 16 is alre

B-18 Reference GuideModel No.Running Head

Reference Guide C-1Appendix CGlossaryC.1 IntroductionThis Appendix lists the glossary of terms used in the telecommunications industry today.AALATM Ad

C-2 Reference GuideModel No.Running HeadAISAlarm Indication SignalAIMATM Inverse Multiplexera-lawE1 companding standard used in the conversion between

Reference Guide C-3BECNBackward Explicit Congestion NotificationBERBit Error Rate, the number of errored bits divided by the total number of bits.BERT

Reference Guide 1-1System Overview IntroductionChapter 1System Overview1.1 IntroductionThis chapter describes the various chassis models used by the i

C-4 Reference GuideModel No.Running HeadCCSCommon Channel SignalingCEPConnection End PointCEPTConference on European Posts and Telecommunications, a E

Reference Guide C-5compandingNon-linear reduction of a signal, usually compressing the larger signal valuesCRCCyclic Redundancy CheckCRC-4CRC using fo

C-6 Reference GuideModel No.Running HeadDCEData Communications EquipmentDCSDigital Cross-connect SystemD-channelFull-duplex, 16 kbps BRI channel or 64

Reference Guide C-7DS0–AStrategy for mapping a single low-speed data circuit to a single DS0.DS0–BStrategy for multiplexing two or more DS0-A low-spee

C-8 Reference GuideModel No.Running HeadEPROMElectronic Programmable Read-Only Memory, stores firmware on plug-in modules of the system.ESFExtended Su

Reference Guide C-9FRADFrame Relay Assembler/Disassembler, a card used in this system.FRSFrame Relay Server, a card used in this system.FSFrame Signal

C-10 Reference GuideModel No.Running HeadHDB3High-Density Bipolar Order of 3, three-zero maximum coding for E1 lines. Provides a fourth zero violatio

Reference Guide C-11ITUInternational Telecommunications Union (previously known as CCITT [Consultative Committee for International Telegraph and Telep

C-12 Reference GuideModel No.Running HeadNNINetwork Node InterfaceNOSNo-Signal AlarmNRZNon-Return-to-Zero signal formatNTUNetwork Termination Unit, co

Reference Guide C-13PDUProtocol Data UnitpingA program used to test IP-level connectivity from one IP address to another.PLARPrivate Line Automatic Ri

Important Safety Instructions1. Read and follow all warning notices and instructions marked on the product or included in this Reference Guide.2. This

1-2 Reference GuideModel No.Running HeadChassis Types System OverviewFigure 1-1. Front-Loading Chassis with Power Supplies on the SideTable 1-1. Car

C-14 Reference GuideModel No.Running HeadRed alarmA local alarm on a T1 line, indicating that a major failure has occurred at this location.robbed-bit

Reference Guide C-15systemOften used as a synonym for the integrated access system.TATerminal AdapterTETerminal EquipmentT1The North American DS1 tran

C-16 Reference GuideModel No.Running HeadUNIUser Network InterfaceUser cardA Voice card, Data card, or Alarm card.VBRVariable Bit RateVCVirtual Channe

Reference Guide 1-3System Overview Chassis Types1.2.2 Front-Loading Chassis with Power Supplies on TopFigure 1-2 shows the front-loading chassis with

1-4 Reference GuideModel No.Running HeadChassis Types System OverviewTable 1-2. Card Slots for Front-Loading Chassis with Power Supplies on Top1.2.3

Reference Guide 1-5System Overview Chassis TypesFigure 1-3. Two-Sided Chassis Front ViewFigure 1-4 shows the rear of the two-sided chassis, which is t

1-6 Reference GuideModel No.Running HeadChassis Types System OverviewTable 1-3. Two-Sided Chassis Card Slots1.2.4Front-Loading Chassis with Enhanced

Reference Guide 1-7System Overview Chassis TypesFigure 1-5. Power Enhanced ChassisThe power enhanced chassis works in a specific environment relating

1-8 Reference GuideModel No.Running HeadChassis Types System OverviewFigure 1-6. External Power Source for the Power Enhanced ChassisACC1 C2 P1 P2 P3

Reference Guide 1-9System Overview Chassis TypesFigure 1-7. Power Supply and Ringer Supports for Power Enhanced ChassisTable 1-4. Card Slots for Fron

1-10 Reference GuideModel No.Running HeadU.S. and European Chassis Configuration System Overview1.3 U.S. and European Chassis ConfigurationThe chassi

Reference Guide 2-1System Installation IntroductionChapter 2System Installation2.1 IntroductionThis chapter provides instructions for unpacking and in

Model No.Running Head8. A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in

2-2 Reference GuideModel No.Running HeadIntroduction System Installation1. Choose a suitable location for the system, as described in this chapter.2.

Reference Guide 2-3System Installation Introduction2.1.4 Choosing a Location for Your SystemThe integrated access system requires a reasonably dust-fr

2-4 Reference GuideModel No.Running HeadIntroduction System Installation2.1.4.2 Wall-Mount Installation TipsTo mount the chassis on a wall, first obt

Reference Guide 2-5System Installation IntroductionThe brackets are also reversible for mounting in 19-inch or 23-inch racks (48.2 or 58.4 cm). For a

2-6 Reference GuideModel No.Running HeadIntroduction System InstallationFigure 2-3. Mounting Holes for Front-Loading Chassis with Power Supplies on

Reference Guide 2-7System Installation Power Supplies and Ringing GeneratorsBe sure both the front and rear of the chassis are accessible for insertin

2-8 Reference GuideModel No.Running HeadPower Supplies and Ringing Generators System Installation2.2.1.2 Ringing GeneratorsRinging generators are nee

Reference Guide 2-9System Installation Installing the System Power CardsAlso be sure to set the same jumper on the system resource cards and external

2-10 Reference GuideModel No.Running HeadInstalling the System Power Cards System InstallationIf the power supply is installed and power is applied,

Reference Guide 2-11System Installation Ringing GeneratorsFigure 2-6. -48V Converter Fuse2.4 Ringing GeneratorsThe ringing generator provides a ringin

Product DescriptionThis integrated access system allows you to take advantage of the sophisticated network services available from long-distance compa

2-12 Reference GuideModel No.Running HeadRinging Generators System Installation3. For a two-sided chassis, remove the panel covering the rear power s

Reference Guide 2-13System Installation System Power and Ground Connections3. Also make sure jumper JP2 is installed on the card, Figure 2-8. This jum

2-14 Reference GuideModel No.Running HeadSystem Power and Ground Connections System Installation2.5.1 Two-Sided ChassisFigure 2-9 shows the power con

Reference Guide 2-15System Installation System Power and Ground ConnectionsFigure 2-9. Power Connector Block on Two-Sided Chassis and Front-Loading C

2-16 Reference GuideModel No.Running HeadSystem Power and Ground Connections System InstallationFigure 2-10. Front-Loading Chassis with Power Supplie

Reference Guide 2-17System Installation System Power and Ground ConnectionsFigure 2-11. Power Connector Block on Front-Loading Chassis with Power Sup

2-18 Reference GuideModel No.Running HeadPowering Up the System System InstallationFigure 2-12. Power Enhanced Chassis with Power Block in Front2.6 P

Reference Guide 2-19System Installation Installing the Other Plug-In CardsIf AC-to-DC converters are used, also check their jumper settings as previou

2-20 Reference GuideModel No.Running HeadInstalling the Other Plug-In Cards System Installation2.7.5 User CardsThe system also has numerous user card

Reference Guide 3-1System Configuration and Operation Basic OperationsChapter 3System Configuration and Operation3.1 Basic OperationsThis chapter prov

Model No.Running HeadSystem Reference GuideThis System Reference Guide assists technicians in unpacking, assembling, configuring, and operating the in

3-2 Reference GuideModel No.Running HeadBasic Screen Map and Legend System Configuration and Operation6. Select the type of chassis used (front-loadi

Reference Guide 3-3System Configuration and Operation Basic Screen Map and Legend3.3.1 Starting a SessionThe first step in starting an operator sessio

3-4 Reference GuideModel No.Running HeadBasic Screen Map and Legend System Configuration and OperationFigure 3-2. Typical Login Screen3. Contact your

Reference Guide 3-5System Configuration and Operation Basic Screen Map and LegendFigure 3-3. Typical System Main Screen(Two-Sided Chassis and Front-Lo

3-6 Reference GuideModel No.Running HeadBasic Screen Map and Legend System Configuration and OperationFigure 3-4. Typical System Main Screen (Front-L

Reference Guide 3-7System Configuration and Operation Basic Screen Map and LegendTable 3-2. System Main Screen Actions3.3.3.2 Voice and Data Card Sta

3-8 Reference GuideModel No.Running HeadBasic Screen Map and Legend System Configuration and OperationFigure 3-5. Typical Card Status DisplayFrom the

Reference Guide 3-9System Configuration and Operation Basic Screen Map and Legend3.3.5 Card Main ScreensEach card in the system has a Card Main Screen

3-10 Reference GuideModel No.Running HeadBasic Screen Map and Legend System Configuration and OperationFigure 3-6. Typical Card Main ScreenThe bottom

Reference Guide 3-11System Configuration and Operation Card Configuration3.3.7 Test and Debug ScreenYou can also go from the System Main Screen to a T

Ordering InformationTo order equipment, cables, or additional copies of this Reference Guide, please contact your distributor.Safety/Regulatory Inform

3-12 Reference GuideModel No.Running HeadCard Configuration System Configuration and OperationBe sure to configure each card according to your networ

Reference Guide 3-13System Configuration and Operation Alarms and Alarm Filters3.5 Alarms and Alarm FiltersAlarms warn you of problems by reporting po

3-14 Reference GuideModel No.Running HeadAlarms and Alarm Filters System Configuration and OperationThe third entry (CSU + CSU) shows the type of car

Reference Guide 3-15System Configuration and Operation Alarms and Alarm FiltersFigure 3-8. Alarm Filters ScreenThe first column of the Alarm Filters S

3-16 Reference GuideModel No.Running HeadAlarms and Alarm Filters System Configuration and OperationThe last column sets the alarm cutoff (ACO) to ac

Reference Guide 3-17System Configuration and Operation Alarms and Alarm Filters3.5.2 Alarm ModifiersEach alarm may also be designated as info, minor,

3-18 Reference GuideModel No.Running HeadReinitializing the System System Configuration and OperationAll alarms (except those set to ignore) appear i

Reference Guide 3-19System Configuration and Operation Reinitializing the SystemWhen you remove and replace most card types, the NVRAM remembers the o

3-20 Reference GuideModel No.Running HeadZipping the System System Configuration and OperationIf the new CPU card was inserted accidentally, the cold

Reference Guide 3-21System Configuration and Operation Zipping the SystemFigure 3-11. Zip Screen3.7.1 Debugging the SystemThe D (Debug) command is onl

Model No.Running HeadIndividually covered or insulated equipment grounding conductors shall have a continuous outer finish that is either green, or gr

3-22 Reference GuideModel No.Running HeadTest, Debug, Backup, & Restore System Configuration and Operation3.8 Test, Debug, Backup, & RestoreA

Reference Guide 3-23System Configuration and Operation Test, Debug, Backup, & RestoreBecause the Backup command creates a simple text file, the ac

3-24 Reference GuideModel No.Running HeadTest, Debug, Backup, & Restore System Configuration and OperationFigure 3-13. Typical System Backup Scre

Reference Guide 3-25System Configuration and Operation Test, Debug, Backup, & Restore1. From the Main Screen, type Y (for sYs).2. Type E (for rEst

3-26 Reference GuideModel No.Running HeadTime Slot Assignment System Configuration and OperationFigure 3-14. Restore Screen3.9 Time Slot AssignmentTh

Reference Guide 3-27System Configuration and Operation Assigning Time Slots to a User CardThe following sections of this chapter describe several ways

3-28 Reference GuideModel No.Running HeadAssigning Time Slots to a User Card System Configuration and OperationFigure 3-15. Time Slot Assignment Exam

Reference Guide 3-29System Configuration and Operation Assigning Time Slots to a User Card4. Set the time slot number by using the up and down arrow k

3-30 Reference GuideModel No.Running HeadAssigning Time Slots to a User Card System Configuration and Operation2. Select the WAN port to which you wa

Reference Guide 3-31System Configuration and Operation Automatic Time Slot Assignment3.10.3 Cross-Connect ModelThe Cross-connect model allows you to a

Power SourceAC: 120 Volts @ 2.0 amps / 240 Volts @ 1 amp, 50/60 HzDC: +24 Volts @ 3.0 amps / -48 Volts @ 1.5 ampsAdditionally, the DC source must prov

3-32 Reference GuideModel No.Running HeadAutomatic Time Slot Assignment System Configuration and Operation1. Reserve three vacant adjacent user card

Reference Guide 3-33System Configuration and Operation Automatic Time Slot AssignmentFigure 3-19. Typical Card Slot and Type SelectionFigure 3-20. Typ

3-34 Reference GuideModel No.Running HeadAutomatic Time Slot Assignment System Configuration and OperationFigure 3-21. Typical System Main Screen wit

Reference Guide 3-35System Configuration and Operation Cross-Connecting WAN Time SlotsFigure 3-22. Typical WAN Time Slot Assignment Screen3.12 Cross-C

3-36 Reference GuideModel No.Running HeadCross-Connecting WAN Time Slots System Configuration and OperationTable 3-4. T1-to-E1 Cross-Connections in

Reference Guide 3-37System Configuration and Operation Cross-Connecting WAN Time SlotsTable 3-5. Time Slot Cross-Connection Options and DefaultsCIRCU

3-38 Reference GuideModel No.Running HeadCross-Connecting WAN Time Slots System Configuration and OperationWARNING!When cross-connecting multiple ind

Reference Guide 3-39System Configuration and Operation Cross-Connecting WAN Time SlotsFigure 3-25. WAN Unit OptionsTS/BWThe first Time Slot/Bandwidth

3-40 Reference GuideModel No.Running HeadCross-Connecting WAN Time Slots System Configuration and OperationFigure 3-26. Time Slot and Bandwidth Optio

Reference Guide 3-41System Configuration and Operation Cross-Connecting WAN Time SlotsFigure 3-27. Test OptionsW/UThe second WAN Unit column is the T1